The Ford Code P060A is an internal control module monitoring processor performance diagnostic trouble code (DTC) that sets when an error has occurred in the Powertrain Control Module (PCM). This DTC can lead to a loss of power in the vehicle, and after repair, the system warning message may still be displayed in the instrument cluster message center. To diagnose the issue, it is essential to check for other DTCs or drive symptoms and for aftermarket performance products before replacing the PCM.
⚡️ Another article: Ford Code P0341
Potential Causes and Solutions for Ford Code P060A
Cause | Solution |
---|---|
Aftermarket performance products | Check for aftermarket products before replacing PCM |
PCM programming error | Reprogram or update the calibration |
Software incompatibility issue | Check for other DTCs or drive symptoms for further action |
PCM internal software error | Check for other DTCs or cause symptoms for further action |
When diagnosing automotive issues, the Ford Code P060A is a standard DTC that appears when an error occurs within the PCM. This code indicates that the internal control module monitoring processor performance is not functioning correctly and could lead to a decrease in vehicle power. To identify the cause of the issue and make the necessary repairs, it is essential to understand the available causes and potential solutions for the P060A code.
⚡️ Another article: Ford Code B11E6:14
Aftermarket Performance Products
One potential cause of the Ford Code P060A is installing aftermarket performance products, such as exhausts, intakes, and computer chips. If these products are incompatible with the vehicle, they can cause the PCM to become overloaded, resulting in the P060A DTC. To diagnose this issue, technicians should check for aftermarket products before replacing the PCM.
📢Read also: Ford Code P061B
PCM Programming Error
Another potential cause of the code P060A is a PCM programming error. This could be caused by a technician who mistakenly programmed the PCM during a previous repair, or it could be due to an outdated or incorrect software calibration. To remedy this issue, the technician must reprogram or update the calibration in the PCM.
🎯Suggested article: Ford Code P0751
Software Incompatibility Issue
A software incompatibility issue can also cause the Ford Code P060A. This could be due to an incorrect software version installed in the PCM, or it could result from a software conflict between the PCM and other vehicle components. To diagnose this issue, technicians should check for other DTCs or drive symptoms before replacing the PCM.
👀Look at this: Ford Code P1237
PCM Internal Software Error
An internal software error in the PCM can also trigger the P060A DTC. This could be due to a poor connection between the PCM and other vehicle components, or it could result from a damaged PCM. To diagnose this issue, technicians should check for other DTCs or drive symptoms for further action.
👀Look at this: Ford Code P0471
Conclusion
The Ford Code P060A is a standard DTC that can lead to vehicle power loss. To diagnose the issue, it is essential to check for other DTCs or drive symptoms and for aftermarket performance products before replacing the PCM. Suppose the problem is due to a software incompatibility or internal software error. In that case, it is essential to make the necessary repairs before the Ford Code P060A causes further damage to the vehicle.
👀Look at this: Ford Code P0471
Was this page helpful?