Ford Code P0751 is a shift solenoid “A” performance or stuck-off-related issue and occurs when the engine is started, the vehicle is driven with the solenoid applied, and the PCM detects a mechanical failure while operating the Shift Solenoid 1/A during the CCM test period. This issue can be caused by a variety of problems, including a stuck solenoid in the “off” position, a mechanical or hydraulic failure, or a failed PCM. To diagnose the issue, the DTC P2700 may be set and should be cleared, and if it returns, then an Engagement Concerns, No Forward issue should be further examined.
🚨You may be interested in: Ford Code P1237
Causes and Solutions for Ford Code P0751
| Cause | Solution |
|---|---|
| SS1/A solenoid is stuck in the “off” position | Diagnose with DTC P2700 and check for any mechanical failure or hydraulic failure. |
| SS1/A solenoid has a mechanical failure | Clear the DTC and check whether the problem persists; further, examine the Forward Clutch system if it does. |
| SS1/A solenoid has a hydraulic failure | Refer to the related Service Bulletins for Ford Code P0751 for further information. |
| PCM has failed | Replace the PCM as soon as possible to fix the Ford Code P0751 issue. |
Shift Solenoid Stuck in “Off” Position
Ford Code P0751 is triggered when the engine is started, and the PCM detects a mechanical failure while operating the Shift Solenoid 1/A during the CCM test period. This problem may be caused by the SS1/A solenoid being stuck in the “off” position. To diagnose the issue, the DTC P2700 should be cleared, and if it returns, then an Engagement Concerns, No Forward issue should be further examined.
⚡️Other article: Ford Code P0112
Mechanical Failure
When the Shift Solenoid 1/A solenoid has a mechanical failure, the DTC should be cleared and checked if the issue persists. If it does, an Engagement Concerns, No Forward issue should be examined further.
Hydraulic Failure
If the Shift Solenoid 1/A solenoid has a hydraulic failure, it is recommended to refer to the related Service Bulletins for Ford Code P0751 for further information.
💥See also: Ford Code P0390
Failed PCM
A failed PCM can also cause Ford Code P0751 issue. Replacing the PCM as soon as possible is recommended to fix the issue.
⚡️Other article: Ford Code P1298
Conclusion: Taking Care of Ford Code P0751
The Ford Code P0751 is a shift solenoid “A” performance or stuck-off-related issue that can be caused by a variety of problems, including a stuck solenoid in the “off” position, a mechanical or hydraulic failure, or a failed PCM. To take care of this issue, it is essential to diagnose the problem with DTC P2700 and check for any mechanical or hydraulic failure. In addition, if the PCM has failed, it should be replaced as soon as possible to fix the Ford Code P0751 issue.
Was this page helpful?