When driving a Chevrolet vehicle, you’re likely familiar with the Chevrolet Code P0151, also known as HO2S Circuit Low Voltage Bank 2 Sensor 1. This code is triggered when the powertrain control module (PCM) detects that the HO2S voltage is less than 50 mV. P0131, P0137, and P0157 often accompany this code, and the DTCs are set within 100 seconds when the above condition is met. While it’s inconvenient to deal with this code, several causes and solutions exist. Here’s a look at the possible causes and solutions to the Chevrolet Code P0151.
🚨You may be interested in: Chevrolet Code P0116
Causes and Solutions to Chevrolet Code P0151
Cause | Solution |
---|---|
P0131, P0137, P0151, or P0157 | Replace the faulty oxygen sensor. |
The ECM detects that the HO2S voltage is less than 50 mV. | Check for any loose or corroded wiring connections. |
The DTCs are set within 100 s when the above condition is met. | Check the fuel pressure. |
The engine is operating in Closed Loop. | Check for any vacuum leaks. |
P0131, P0137, P0151, or P0157
The first possible cause of the Chevrolet Code P0151 is related to P0131, P0137, P0151, or P0157. This means the oxygen sensor is not functioning properly and must be replaced. This is the most common cause of the code and is relatively easy to fix.
The ECM Detects that the HO2S Voltage is Less than 50 mV
The second possible cause of the Chevrolet Code P0151 is the ECM detecting that the HO2S voltage is less than 50 mV. This can be caused by loose or corroded wiring connections, which should be checked immediately. If the wiring is not the issue, then there may be a fuel pressure issue or a vacuum leak that needs to be addressed.
🎯Suggested article: Chevrolet Code P1448
The DTCs Set Within 100 s when the Above Condition is Met
The third possible cause of the Chevrolet Code P0151 is the DTCs setting within 100 s when the above condition is met. This can be caused by a fuel pressure issue, which should be addressed immediately. It could also be rendered by a vacuum leak, which should also be checked.
The Engine is Operating in a Closed Loop
The fourth possible cause of the Chevrolet Code P0151 is related to the engine operating in a closed loop. This means that the oxygen sensor is not functioning properly and should be checked for any vacuum leaks. If the vacuum leaks are the cause, they should be fixed immediately.
Conclusion
The Chevrolet Code P0151 is triggered when the powertrain control module (PCM) detects that the HO2S voltage is less than 50 mV. This code is often accompanied by P0131, P0137, and P0157, and the DTCs are set within 100 seconds when the above condition is met. The possible causes of the code include a faulty oxygen sensor, loose or corroded wiring connections, a fuel pressure issue, or a vacuum leak. By identifying the cause and addressing the problem, you can fix the Chevrolet Code P0151 and get your vehicle back on the road. With the right knowledge and tools, you can quickly and easily resolve the Chevrolet Code P0151 issue.
🎯Suggested article: Chevrolet Code P0AC4
Was this page helpful?