Driving a BMW can be a great experience, but if you encounter a code P0460, you may have a problem. BMW code P0460 indicates a Fuel Level Sensor “A” Circuit Malfunction. This means that the KOEO or KOER Self-Test has been enabled, and the DME detected a lack of power (VPWR) to the Fuel Pressure Regulator Control (FPRC) solenoid circuit. If the cluster receives an incorrect fuel level from the CAN or no message, the calculated consumption may not correspond to the actual fuel level in the tank. Knowing the causes and solutions to this issue is important to get your BMW back on the road quickly and safely.
📢Read also: BMW Code P0597
Common Causes and Solutions for BMW Code P0460
| Causes | Solutions |
|---|---|
| FPRC solenoid valve harness circuits are open or shorted | Check and replace the harness circuits as needed |
| FPRC input port or output port vacuum lines are damaged | Replace the vacuum lines as needed |
| FPRC solenoid is damaged | Replace the FPRC solenoid |
| Fuel level is too low | Fill the tank with fuel and reset the system |
You may feel overwhelmed if you own a BMW and have encountered code P0460. This code can be caused by various problems, ranging from an open or shorted FPRC solenoid valve harness circuit to a damaged FPRC solenoid or even a low fuel level. Knowing the causes and solutions to this issue can help you get your BMW back on the road quickly and safely. Fortunately, there are a few steps that you can take to diagnose and repair this problem.
Check and Replace the Harness Circuits as Needed
The first step in diagnosing the BMW code P0460 is to check the FPRC solenoid valve harness circuits. If the circuits are open or shorted, they need to be replaced. This can be done by a qualified mechanic or by following the instructions in your BMW’s repair manual.
Replace the Vacuum Lines as Needed
The next step is checking the FPRC input or output port vacuum lines. If the lines are damaged, they must be replaced to prevent the code from reappearing. This can be done with the help of a qualified mechanic or by following the instructions in your BMW’s repair manual.
📢Read also: BMW Code P2094
Replace the FPRC Solenoid
Finally, if the FPRC solenoid is damaged, it must be replaced to fix the code P0460. This can be done by a qualified mechanic or by following the instructions in your BMW’s repair manual.
Fill the Tank with Fuel and Reset the System
If the fuel level is too low, the code P0460 will appear. You must fill the tank with fuel and reset the system to fix this issue. This can be done with the help of a qualified mechanic or by following the instructions in your BMW’s repair manual.
Conclusion: Troubleshooting BMW Code P0460
The BMW code P0460 can be caused by various problems, ranging from an open or shorted FPRC solenoid valve harness circuit to a damaged FPRC solenoid or even a low fuel level. To diagnose and repair this issue, it is important to check and replace the harness circuits as needed, replace the vacuum lines as required, replace the FPRC solenoid, fill the tank with fuel, and reset the system. By following these steps, you can quickly and safely troubleshoot and fix the BMW code P0460.
🚀Recommended article: BMW Code P0208
Was this page helpful?