Having a BMW with the code P0208 can be an intimidating experience, and it can be hard to diagnose the issue. The BMW P0208 code indicates a Cylinder 8 Injector Circuit Malfunction. This means that the engine has started, but the DME has detected that the fuel injector “8” control circuit is in a high state when it should have been low or in a common condition when it should have been increased. The battery voltage should be between 9.5 and 17. There are a few possible causes for BMW code P0208, such as an injector eight connector that is damaged, open, or shorted or an injector eight available control circuit shorted to ground or power. Knowing this code’s potential causes and solutions can help make diagnosing the issue much less daunting.
👀Look at this: BMW Code P0341
Causes and Solutions for BMW Code P0208
| Causes | Solutions |
|---|---|
| The injector’s eight connectors are damaged | Replace the injector eight connector |
| The injector eight control circuit is open | Check for an available course in the injector eight control circuit |
| The injector, eight control circuit, is shorted to ground | Check for short circuits in the injector eight control circuit |
| The injector eight control circuit is shorted to power | Check for short courses in the injector eight control circuit |
Having a BMW with code P0208 can be very confusing and uncomfortable. It is essential to understand what the code is and what potential causes and solutions are associated with it. The BMW P0208 code indicates a Cylinder 8 Injector Circuit Malfunction. This means that the engine has started, but the DME has detected that the fuel injector “8” control circuit is in a high state when it should have been low or in a common condition when it should have been increased. The battery voltage should be between 9.5 and 17. Possible causes of this code include an injector eight connector that is damaged, open, or shorted or an injector eight available control circuit shorted to ground or power. Knowing the causes and solutions of this code can help make the process of diagnosing the issue much more accessible.
🎯Suggested article: BMW Code P1339
Inspecting the Injector 8 Connector
If the BMW code P0208 is present, the first step is to inspect the injector’s eight connectors. This connector should be checked for any damage, open or shorted. If the connector is found to be damaged, then it should be replaced.
Checking the Injector 8 Control Circuit
The next step in diagnosing BMW code P0208 is to check the injector eight control circuit. This should be checked for any open, shorted to ground, or power. If any of these issues are found, then they should be corrected.
Replacing the Fuel Injector
If all other causes have been ruled out, the fuel injector may need replacing. Replacing the injector can be complicated and should only be attempted by an experienced technician.
Conclusion
Diagnosing a BMW with code P0208 can be a complex and intimidating process. It is essential to understand this code’s potential causes and solutions so that the operation can be made much more accessible. The causes of this code include an injector eight connector that is damaged, open, or shorted or an injector eight available control circuit shorted to ground or power. Solutions include replacing the injector eight connectors, checking the injector eight control circuit for any loose, shorted-to-ground, or management, and replacing the fuel injector. Diagnosing this issue can be made much simpler with the proper knowledge of BMW Code P0208.
Was this page helpful?