Toyota’s Code C1445 is a common issue among Toyota owners and can be a significant source of frustration. This code is defined as “Vehicle Driven with Steering Angle Sensor, not Initialized.” The steering angle sensor usually causes it, the yaw rate and acceleration sensor and the brake actuator assembly (Skid control ECU). To understand the causes and solutions to this code, it is essential to understand the underlying issues that can cause it. This article will discuss the potential causes and solutions to Toyota Code C1445 to help Toyota owners troubleshoot the problem and get their vehicles running as soon as possible.
🚨You may be interested in: Toyota Code P0990
Causes and Solutions to Toyota Code C1445
| Cause | Solution |
|---|---|
| Steering Angle Sensor | Replace the steering angle sensor |
| Yaw Rate and Acceleration Sensor | Check the wiring harness and replace the sensor if needed |
| Brake Actuator Assembly (Skid Control ECU) | Replace the brake actuator assembly |
| Software Error | Perform a software update to fix the issue |
Steering Angle Sensor
The steering angle sensor is a critical component of the vehicle as it detects the steering wheel angle and the speed of the car. If the steering angle sensor is not working correctly, it can lead to the Toyota Code C1445. The best solution for this issue is to replace the steering angle sensor.
🚨You may be interested in: Toyota Code P1420
Yaw Rate and Acceleration Sensor
The yaw rate and acceleration sensor detect the vehicle’s velocity and direction. If there is a wiring issue with the sensor, it can cause the Toyota Code C1445. The best way to diagnose this issue is to check the wiring harness and replace the sensor if needed.
👀Look at this: Toyota Code C1340/47
Brake Actuator Assembly (Skid Control ECU)
The brake actuator assembly is responsible for controlling the brakes of the vehicle. If the brake actuator assembly is faulty, it can lead to the Toyota Code C1445. The best solution for this issue is to replace the brake actuator assembly.
Software Error
A software error can also cause Toyota Code C1445. The best solution for this issue is to perform a software update to fix the problem.
📢Read also: Toyota Code B1422/22
Conclusion
In conclusion, the Toyota Code C1445 can be caused by various issues, including the steering angle sensor, the yaw rate and acceleration sensor, the brake actuator assembly, and a software error. The best solutions for these issues are replacing the steering angle sensor, checking the wiring harness and the sensor if needed, replacing the brake actuator assembly, and performing a software update. Toyota owners should take the necessary steps to diagnose and fix Toyota Code C1445 to get their vehicles running as soon as possible.
Was this page helpful?