The Toyota Code P1420 is a complex issue that can affect the performance of specific Toyota models. This code is an indication of an evaporative emission canister small leak which can cause a vacuum pump to create negative pressure in the EVAP system. The system is then measured to ensure it does not exceed the 0.02 inch leak pressure standard. If the leak pressure is greater than the standard, it could be a sign of a number of different issues. Understanding the causes and possible solutions of the Toyota Code P1420 is essential for any vehicle owner.
📢Read also: Toyota Code B1422/22
Causes and Solutions of Toyota Code P1420
| Cause | Solution |
|---|---|
| Leakage from EVAP line (Canister -Fuelvapor-containment valve) | Replace the EVAP line and test the system |
| Leakage from EVAP line (Purge VSV -Canister) | Check the EVAP line for cracks and holes and replace them if needed |
| Pump module | Inspect the pump module for damage and replace it if needed |
| Leakage from canister | Replace the canister and inspect the EVAP system |
The Toyota Code P1420 is a complex issue that can create a vacuum pump that creates negative pressure in the EVAP system. When this happens, the system is measured to ensure it does not exceed the 0.02-inch leak pressure standard. If the leak pressure is greater than the standard, it could be a sign of a number of different issues. These issues can range from leakage from the EVAP line, the pump module, or the canister. Solving these problems requires various solutions, such as replacing the EVAP line and testing the system, inspecting the pump module for damage, replacing the canister, and inspecting the EVAP system. Knowing the causes and solutions of Toyota Code P1420 is essential for any vehicle owner.
🎯Suggested article: Toyota Code P0402
Leakage from EVAP line (Canister -Fuelvapor-containment valve)
When the Toyota Code P1420 is triggered, it could indicate leakage from the EVAP line (Canister -Fuel vapor-containment valve). In this case, the solution is to replace the EVAP line and test the system to ensure the leak pressure does not exceed the 0.02-inch standard.
Leakage from EVAP line (Purge VSV -Canister)
Another possible cause of the Toyota Code P1420 is leakage from the EVAP line (Purge VSV -Canister). In this instance, the solution is to check the EVAP line for cracks and holes and replace it if necessary.
Pump module
A malfunctioning pump module could also trigger the Toyota Code P1420. To solve this, it is necessary to inspect the pump module for damage and replace it if needed.
Leakage from canister
The last possible cause of the Toyota Code P1420 is leakage from the canister. In this case, the solution is to replace the canister and inspect the EVAP system.
Conclusion
The Toyota Code P1420 is an indication of an evaporative emission canister small leak, which can cause a vacuum pump to create negative pressure in the EVAP system. To fix this issue, vehicle owners must understand the various causes and solutions for Toyota Code P1420. These causes range from leakage from the EVAP line, the pump module, or the canister. Solutions can include replacing the EVAP line and testing the system, inspecting the pump module for damage and replacing the canister, and inspecting the EVAP system. Learning the potential causes and solutions of Toyota Code P1420 is essential for any vehicle owner.
Was this page helpful?