When it comes to Mitsubishi Code C2204, there is an internal abnormality in the G and yaw rate sensors. This code is set when the self-diagnosis of the G and yaw rate sensors detects any malfunction or if the output value of the G and yaw rate sensor does not fall within the standard value
When it comes to Mitsubishi Code P1778, it is an indication of a malfunction in the transmission system that needs to be addressed as soon as possible. The code is generated when the difference between the target value of the primary pulley speed and the actual measurement value is greater than the standard value, with
The Mitsubishi Code P2100 is an issue that can occur when the output voltage of the (main) and (sub) throttle position sensors is higher than 8.3 volts, causing the drive duty of the throttle actuator control motor to be 100 percent or more. This code can be triggered if the throttle actuator control motor fails,
Mitsubishi Code P0442 is an auto-code that indicates an issue with the Evaporative Emission Control System (EVAP) in vehicles made by Mitsubishi. This code is triggered when the EVAP system detects a small leak, the intake air temperature is greater than -10°C (14°F), and the engine coolant temperature is greater than 20°C (68°F). An issue