The Mitsubishi Code P2100 is an issue that can occur when the output voltage of the (main) and (sub) throttle position sensors is higher than 8.3 volts, causing the drive duty of the throttle actuator control motor to be 100 percent or more. This code can be triggered if the throttle actuator control motor fails, there is damage to the open throttle actuator control motor circuit, or if the ECM or PCM fails. It is important to identify and address the causes of this code as quickly as possible, as it can seriously impact the functioning of your Mitsubishi vehicle. This article will explore the causes, solutions, and related service bulletins for the Mitsubishi Code P2100.
🚨You may be interested in: Mitsubishi Code P0442
Causes and Solutions of Mitsubishi Code P2100
| Cause | Solution |
|---|---|
| The throttle actuator control motor failed | Replace the throttle actuator control motor |
| Open throttle actuator control motor circuit, harness damage, or connector damage | Check the wiring and connectors and repair any damage |
| ECM failed | Replace the ECM |
| PCM failed | Replace the PCM |
When an issue arises with the Mitsubishi Code P2100, it is important to identify the cause and take the necessary steps to resolve it. This code is triggered when the output voltage of the (main) and (sub) throttle position sensors is higher than 8.3 volts, causing the drive duty of the throttle actuator control motor to be 100 percent or more. If the throttle actuator control motor fails, the open throttle actuator control motor circuit, harness damage, or connector damage must be checked and repaired. Additionally, they need to be replaced if the ECM or PCM fails. This article explored the causes, solutions, and related service bulletins for the Mitsubishi Code P2100.
Conclusion: Solving the Mitsubishi Code P2100
The Mitsubishi Code P2100 is an issue that can seriously impact your Mitsubishi vehicle’s functioning. Thus, it is important to identify and address the causes of this code as quickly as possible. This article explored the causes, solutions, and related service bulletins for the Mitsubishi Code P2100. The possible causes of the code are throttle actuator control motor failure, open throttle actuator control motor circuit, harness damage, connector damage, ECM failure, and PCM failure. The solutions include replacing the throttle actuator control motor, checking and repairing any wiring or connectors, and replacing the ECM or PCM if necessary. By understanding the causes and solutions for the Mitsubishi Code P2100, you can take the steps needed to identify and resolve the issue as quickly as possible.
Was this page helpful?