When you are driving your Jeep, and you are presented with the code P2121, it indicates an issue with the accelerator pedal position sensor performance. This code is generated when the ignition is on, and the APP Sensor #1 and APP Sensor #2 signals do not agree. This code can be caused by various issues, including an intermittent DTC, circuit shorts or opens, or the accelerator pedal position sensor itself. Knowing this code’s potential causes and solutions can help you quickly identify and correct the issue.
🎯Suggested article: Jeep Code U0401
Causes and Solutions for Jeep Code P2121
| Causes | Solutions |
|---|---|
| Intermittent DTC | Check for any loose or corroded wiring or connectors |
| (F855) Accelerator Pedal Position Sensor No. 1 5 Volt Supply Circuit Shorted to Voltage | Check the voltage for the appropriate circuit |
| (K23) Accelerator Pedal Position Sensor No. 1 Signal Circuit Shorted to Voltage | Check the voltage for the appropriate circuit. |
| (K167) Accelerator Pedal Position Sensor No. 1 Sensor Ground Circuit Shorted to Voltage | Check the voltage for the appropriate circuit |
Intermittent DTC
When the code P2121 is generated due to an intermittent DTC, the solution lies in checking for any loose or corroded wiring or connectors. This should be done carefully, as any incorrect handling can lead to further damage. The issue should be resolved once all connectors are checked and loose wiring is tightened.
🚀Recommended article: Jeep Code P0013
(F855) Accelerator Pedal Position Sensor No. 1 5 Volt Supply Circuit Shorted to Voltage
The (F855) code can be caused when the 5-volt supply circuit of the accelerator pedal position sensor #1 is shorted to the voltage. To resolve this code, the voltage for the appropriate circuit should be checked. The voltage should be between 4.5 to 5.5 V. If it is out of the range, the course should be inspected for any opens or shorts and checked for faulty components.
(K23) Accelerator Pedal Position Sensor No. 1 Signal Circuit Shorted to Voltage
The (K23) code can be caused when the signal circuit of the accelerator pedal position sensor #1 is shorted to the voltage. To resolve this code, the voltage for the appropriate circuit should be checked. The voltage should be between 0.5 to 4.5 V. If it is out of the range, the course should be inspected for any opens or shorts and checked for faulty components.
👀Look at this: Jeep Code C2200
(K167) Accelerator Pedal Position Sensor No. 1 Sensor Ground Circuit Shorted to Voltage
The (K167) code can be caused when the ground circuit of the accelerator pedal position sensor #1 is shorted to the voltage. To resolve this code, the voltage for the appropriate circuit should be checked. The voltage should be between 0.1 to 0.2 V. If it is out of the range, the course should be inspected for any opens or shorts and checked for faulty components.
Conclusion: Resolving Jeep Code P2121
When presented with Jeep Code P2121, it indicates an issue with the accelerator pedal position sensor performance. Knowing this code’s potential causes and solutions can help you quickly identify and correct the problem. Causes of this code can include intermittent DTC, circuit shorts or opens, or the accelerator pedal position sensor itself. Solutions for this code can involve checking for any loose or corroded wiring or connectors and the voltage for the appropriate circuit. Using the information provided, you can quickly resolve Jeep Code P2121 and get back on the road.
📢Read also: Jeep Code U1403
Was this page helpful?