Regarding the issues of the Chevrolet Code P128E, it is essential to understand the causes and possible solutions. This code is related to Fuel Rail Pressure Performance and is used on cars with fuel tank levels greater than 15%. The engine must be in crank or run mode to activate this code. This code’s causes can vary, such as fuel rail pressure being too low or too high or related service bulletins. Identifying and fixing the exact cause of this code is a priority for any car owner, as it can affect the car’s performance.
🚀Recommended article: Chevrolet Code P0141
Causes and Solutions of Chevrolet Code P128E
| Causes | Solutions |
|---|---|
| Actual fuel rail pressure is below 15 MPa (2175 psi) for greater than 6 s. | Check the fuel pressure regulator, fuel line, fuel filter, and fuel injectors for obstructions or clogs. |
| Actual fuel rail pressure exceeds 215 MPa (31,183 psi) for greater than 1 s. | Check the fuel pressure regulator for any leaks or blockages. Replace any worn or damaged parts. |
| 16-NA-102 | Change the fuel pressure regulator and inspect the fuel system. |
| PI0699A | Replace the fuel injectors and inspect the fuel system. |
Actual Fuel Rail Pressure is Too Low
When the actual fuel rail pressure is below 15 MPa (2175 psi) for a longer period, it can cause the Chevrolet Code P128E to be activated. The first step in resolving this issue is to check the fuel pressure regulator, fuel line, fuel filter, and fuel injectors for any obstructions or clogs. If these components are not the source of the problem, the fuel pressure regulator might need to be replaced.
Actual Fuel Rail Pressure is Too High
When the actual fuel rail pressure exceeds 215 MPa (31,183 psi) for longer than a second, the Chevrolet Code P128E will be triggered. You must check the fuel pressure regulator for any blockages or leaks to fix this. If these are not the source of the problem, the fuel pressure regulator might need to be replaced with a new one.
🚀Recommended article: Chevrolet Code P0AC4
Service Bulletins
If the Chevrolet Code P128E is triggered due to a service bulletin, such as the 16-NA-102 or PI0699A, the fuel pressure regulator and fuel injectors must be replaced. After replacing these components, the fuel system must be inspected for further problems.
Conclusion
The Chevrolet Code P128E is a code related to Fuel Rail Pressure Performance and is triggered when the fuel rail pressure is too low or too high. To identify and fix the root cause of the problem, the car owner needs to check the fuel pressure regulator, fuel line, fuel filter, and fuel injectors for any obstructions or clogs. They also need to be aware of any service bulletins that could be causing the code to be triggered. To ensure that the Chevrolet Code P128E is fixed properly, inspecting the fuel system after replacing worn or damaged parts is important.
🚀Recommended article: Chevrolet Code C0455 39
Was this page helpful?