Chevrolet Code C0455 39 is an internal electronic failure related to certain Chevrolet models’ front steering position sensor circuits. This failure is usually identified when the ignition voltage is greater than 10V. The causes of this failure are usually either C0455 39 or C0455 5A or a short to voltage, short to ground, or open/high resistance on one of the steering angle sensor circuits. Additionally, the signal has too few pulses to indicate a problem. It is important to understand the causes and solutions to prevent and repair this failure.
💥See also: Chevrolet Code P2495
Causes and Solutions of Chevrolet Code C0455 39
| Causes | Solutions |
|---|---|
| C0455 39 or C0455 5A | Repair all related wiring and connections |
| Short to voltage, short to ground, or open/high resistance on one of the steering angle sensor circuits | Check the steering angle sensor and replace it if necessary |
| The signal has too few pulses | Calibrate the steering angle sensor |
| Ignition voltage is greater than 10 V | Replace the ignition switch and repair any related wiring and connections |
C0455 39 or C0455 5A
When the Chevrolet Code C0455 39 is caused by C0455 39 or C0455 5A, the best solution is to repair all related wiring and connections. All wires and links leading to and from the steering angle sensor must be checked and repaired. It is important to ensure that all cables are securely connected and there are no wiring breaks. Additionally, it is important to ensure that the wiring is not damaged or corrupted.
Short to Voltage, Short to Ground, or Open/High Resistance on One of the Steering Angle Sensor Circuits
The next cause for the Chevrolet Code C0455 39 is a short-to-voltage, short-to-ground, or open/high resistance on one of the steering angle sensor circuits. This means the steering angle sensor must be checked and replaced if necessary. It is important to ensure that the steering angle sensor is functioning correctly and that there are no issues with the wiring or connections. The steering angle sensor must be calibrated perfectly to ensure it works correctly.
🚀Recommended article: Chevrolet Code B1001 45
Signal Has Too Few Pulses
The third cause of the Chevrolet Code C0455 39 is a signal with too few pulses. Various factors can cause this, but calibrating the steering angle sensor is the best solution. This means that the steering angle sensor must be calibrated correctly to ensure that it is working correctly and that there are no issues with the wiring or connections. Additionally, the calibration must be done correctly to ensure the signal is being sent correctly.
Ignition Voltage is Greater Than 10V
The final cause of the Chevrolet Code C0455 39 is an ignition voltage greater than 10V. Various factors can cause this, but replacing the ignition switch and repairing any related wiring and connections is the best solution. The ignition switch must be returned and any related wiring and links must be checked and repaired. Additionally, the ignition voltage must be checked to ensure it is below 10V.
🚨You may be interested in: Chevrolet Code C0565 5A
Conclusion
The Chevrolet Code C0455 39 is an internal electronic failure related to certain Chevrolet models’ front steering position sensor circuits. This failure can be caused by C0455 39 or C0455 5A, a short to voltage, short to ground, open/high resistance on one of the steering angle sensor circuits, or a signal with too few pulses.
The ignition voltage must also be checked to ensure it is below 10V. It is important to understand the causes and solutions to prevent and repair this failure. The best solutions for the Chevrolet Code C0455 39 include repairing all related wiring and connections, checking and replacing the steering angle sensor, calibrating the steering angle sensor, replacing the ignition switch and repairing any related wiring and connections.
Was this page helpful?