If your Toyota car is suffering from engine problems due to ignition coil “D” primary/secondary circuit, you may be dealing with Code P0354. This fault code is triggered when the engine control module (ECM) does not receive an IGF signal from the ignition coil while the engine is running. Knowing the possible causes and solutions to this issue can help you get your car back on the road as quickly as possible. Toyota Code P0354 represents a common problem with Toyota vehicles, and identifying the source of the fault can be the difference between addressing the issue quickly or undergoing a costly repair process. Below is a table of possible causes and solutions for Toyota Code P0354.
🎯Suggested article: Toyota Code P0010
Causes and Solutions for Toyota Code P0354
| Cause | Solution |
|---|---|
| Faulty Ignition System | Inspect the ignition system |
| Open or Short in IGF1 or IGT4 Circuit | Inspect the IGF1 or IGT4 circuit between the ignition coil with igniter and ECM |
| Faulty No. 4 Ignition Coil with Igniter | Replace the No. 4 ignition coil with an igniter |
| Defective ECM | Replace the ECM |
Faulty Ignition System
The first cause of Toyota Code P0354 is a faulty ignition system. This could include several components, such as the spark plugs, ignition cables, or the coil. If any of these components are not functioning correctly, the ECM will not receive the IGF signal from the ignition coil. A thorough inspection of the ignition system should be performed to identify any faulty components.
Open or Short in IGF1 or IGT4 Circuit
Another possible cause of Toyota Code P0354 is open or short in the IGF1 or IGT4 circuit. This circuit connects the ignition coil with the igniter to the ECM, and if it is defective, the ECM will not receive the IGF signal. A careful circuit inspection should be performed to identify any issues, and any faulty components should be replaced.
📢Read also: Toyota Code P0174
Faulty No. 4 Ignition Coil with Igniter
Another possible cause of Toyota Code P0354 is a faulty No. 4 ignition coil with an igniter. This component is responsible for delivering the IGF signal to the ECM, and if it is defective, the ECM will not receive the signal. If the No. 4 ignition coil with the igniter is not functioning correctly, it should be replaced.
Defective ECM
The final possible cause of Toyota Code P0354 is a defective ECM. The ECM is responsible for receiving the IGF signal from the ignition coil; if it is faulty, it will not be able to receive the signal. If the ECM is defective, it should be replaced.
Conclusion: Solving Toyota Code P0354
Toyota Code P0354 is a common problem with Toyota vehicles and can be caused by several issues. The most common causes are a faulty ignition system, an open or short in the IGF1 or IGT4 circuit, a faulty No. 4 ignition coil with an igniter, and a defective ECM. Knowing the possible causes and solutions to this issue can help you identify the source of the fault quickly and get your car back on the road as soon as possible. Toyota Code P0354 is a problem that can be solved with the right knowledge and tools.
🎯Suggested article: Toyota Code P1346
Was this page helpful?