When it comes to diagnosing and resolving issues with your Hyundai vehicle, the first step is to understand what code B1112 means. This code indicates that the battery voltage is too low, usually caused by a faulty connection, fuse, charging system, or an issue with the SRSCM (Surface Rapid System Control Module). It’s essential to identify the cause of the issue before attempting to fix it. To help you identify the root cause of your Hyundai’s code B1112, this article will provide a table of causes and their corresponding solutions. By understanding what the code means and its possible causes, you can take the necessary steps to repair your Hyundai and get it back on the road.
🚀Recommended article: Hyundai Code B1448
Causes and Solutions of Hyundai Code B1112
| Cause | Solution |
|---|---|
| Faulty Connector or Harness | Replace the faulty connector or harness |
| Blown Fuse | Replace the blown fuse |
| Issues with Battery or Alternator | Replace the battery or alternator if needed |
| SRSCM Malfunction | Repair or replace the SRSCM |
Faulty Connector or Harness
A faulty connector or harness is one of the most common causes of Hyundai code B1112. The connector may be loose, broken, or corroded, leading to decreased voltage levels. You need to replace the faulty connector or harness to fix this issue.
Blown Fuse
Another possible cause of Hyundai code B1112 is a blown fuse. Fuses are often used to protect electrical circuits from excessive current. When a fuse blows, it can disrupt the flow of electricity and cause your car’s battery voltage to drop. To resolve this issue, you need to replace the blown fuse.
⚡️Other article: Hyundai Code P2159
Issues with Battery or Alternator
If the fuse and connector are not the problems, then you may need to look at the battery or alternator. The battery can cause code B1112 if it’s not holding a charge, while the alternator can cause the code if it’s not producing enough voltage. If either of these components is the issue, then you need to replace it.
SRSCM Malfunction
The SRSCM (Surface Rapid System Control Module) can also cause code B1112. The SRSCM is responsible for controlling the electrical systems in your car, and if it malfunctions, then it can cause the battery voltage to drop. To fix this, you need to repair or replace the SRSCM.
🎯Suggested article: Hyundai Code P0076
Conclusion: Understanding and Resolving Hyundai Code B1112
By understanding what Hyundai code B1112 is and its possible causes, you can take the necessary steps to repair your car and get it back on the road. A faulty connector or harness, a blown fuse, issues with the battery or alternator, and an SRSCM malfunction can all lead to code B1112. By correctly diagnosing and fixing the issue, you’ll be able to get your Hyundai running smoothly again.
🎯Suggested article: Hyundai Code P2173
Was this page helpful?