When it comes to Honda vehicles, the code P0523 can be a source of confusion. Honda code P0523 is related to the rocker arm oil pressure sensor A, which is responsible for measuring the oil pressure in the engine. When the engine speed is at 4,000 rpm, and the engine coolant is at 140 ºF (60 ºC), the sensor’s output voltage must be 4.79 volts or higher for at least two seconds. If this code is triggered, it can be caused by various issues, from poor connections or loose terminals between the sensor and the Powertrain Control Module (PCM) to an open circuit between the two components. It is also possible that the sensor itself or the PCM could be faulty, or the PCM may need to be updated with the latest software.
👀Look at this: Honda Code B2983
Causes and Solutions for Honda Code P0523
| Cause | Solution |
|---|---|
| Poor connections or loose terminals at the rocker arm oil pressure sensor A and the PCM | Check and tighten all connections and terminals between the PCM and the sensor. If necessary, replace the connections and terminals. |
| “Open” circuit between the PCM and rocker arm oil pressure sensor A | Check the wiring for any breaks or frays and replace them if necessary. |
| Faulty rocker arm oil pressure sensor A | Replace the sensor. |
| PCM may need to be updated with the latest software | Update the PCM with the latest software version. |
| Faulty PCM | Replace the PCM. |
Troubleshooting Poor Connections or Loose Terminals
When the Honda code P0523 is triggered, the first step is to inspect the connections and terminals between the rocker arm oil pressure sensor A and the Powertrain Control Module (PCM). If the connections or terminals are loose, the engine may not be able to read the output from the sensor correctly. The technician must inspect each connection and terminal for damage or looseness to fix this. If necessary, the technician may need to replace the connections and terminals.
🎯Suggested article: Honda Code P0615
Checking for an Open Circuit
The next step in troubleshooting the Honda code P0523 is to check for an open circuit between the PCM and the rocker arm oil pressure sensor A. When an open circuit is present, the engine cannot read the output from the sensor correctly. The technician must inspect the wiring for any breaks or frays to fix this. If the wiring is damaged, the technician must replace it with new wiring.
Replacing the Rocker Arm Oil Pressure Sensor A
If the connections and terminals are in good condition and there are no open circuits, the next step is to check the rocker arm oil pressure sensor A for any signs of damage. If the sensor is faulty, the technician must replace it with a new one.
Updating the PCM Software
Finally, if all other steps have been completed, the technician must check to see if the PCM needs to be updated with the latest software version. If the software is outdated, the engine may be unable to read the sensor output correctly. The technician must update the PCM with the latest software version to fix this.
Conclusion
When the Honda code P0523 is triggered, it can be caused by a variety of issues, such as poor connections or loose terminals between the rocker arm oil pressure sensor A and the Powertrain Control Module (PCM), an open circuit between the two components, a faulty sensor, or an outdated PCM software version. By troubleshooting each of these causes, the technician can identify and fix the issue, restoring the engine to proper operation. Honda code P0523 can be difficult to diagnose, but the problem can be quickly and easily resolved with the right tools and knowledge.
👀Look at this: Honda Code P1570/66
Was this page helpful?