When it comes to engine problems, Ford Code P0782 is something that should not be overlooked. This code can indicate a potential problem with the transmission related to the shift from 2nd to 3rd gear. The code is triggered when the powertrain control module (PCM) detects an incorrect 2-3 gear ratio during a shift event. It is essential to identify the cause of this code and take the necessary steps to resolve it. Common reasons for P0782 include a stuck solenoid, a hydraulic problem, or damage to the transmission that requires replacement. It is best to consult the related service bulletins, such as 14-0153 and 16-0032, to ensure a proper diagnosis.
👀Look at this: Ford Code C0002:01
Common Causes and Solutions for Ford Code P0782
| Cause | Solution |
|---|---|
| SS1/A Solenoid Stuck | Replace the solenoid |
| SS1/A Solenoid Hydraulic Problem | Check the solenoid’s hydraulic system |
| SS2/B Solenoid Stuck | Replace the solenoid |
| SS2/B Solenoid Hydraulic Problem | Check the solenoid’s hydraulic system |
| Damaged Friction Material | Replace any damaged friction material |
| Transmission Internal Damage | Replace the transmission |
Stuck or Damaged Solenoid
One of the primary causes of Ford Code P0782 is a stuck or damaged solenoid. The solenoid controls the flow of hydraulic fluid within the transmission. If the solenoid is stuck, the liquid will not flow correctly, resulting in an incorrect 2-3 gear ratio. In this case, the solenoid should be replaced. Additionally, if the solenoid is damaged, the hydraulic system should be checked for any other issues causing the code.
💥See also: Ford Code P0104
Damaged Friction Material
Another common cause of Ford Code P0782 is damaged friction material. This is usually due to wear and tear or improper installation. If the friction material is damaged, it can prevent the transmission from shifting correctly, resulting in an incorrect 2-3 gear ratio. In this case, the friction material should be replaced to resolve the issue.
Transmission Internal Damage
Finally, Ford Code P0782 can be caused by internal damage to the transmission. This can result from several factors, including wear and tear, improper installation, or a lack of maintenance. In this case, the information should be replaced to resolve the issue.
🚨You may be interested in: Ford Code B11E6:14
Conclusion
Ford Code P0782 indicates a potential problem with the transmission related to the shift from 2nd to 3rd gear. Common causes of this code include a stuck solenoid, a hydraulic problem, or damage to the information that requires replacement. By consulting the related service bulletins and identifying the cause of the code, the necessary steps can be taken to resolve it. After determining the issue, drivers can be confident that their vehicle is running at optimal performance levels with Ford Code P0782.
Was this page helpful?