Ford Code P0722 is a trouble code that stands for “Output Shaft Speed Sensor Circuit No Signal”. This code points to a problem with the output shaft speed sensor, which is responsible for measuring the speed of the rotation of the output shaft. When this code is triggered, the output shaft speed sensor does not send a signal to the vehicle’s computer. The causes of this code can vary, but the most common causes are damaged OSS connectors, damaged OSS sensors, incorrectly installed OSS sensors, OSS wiring harness intermittently shorting, or OSS wiring harness opening. To diagnose this code, one must check the wiring, connector, and OSS sensor for damage.
💥See also: Ford Code P0023
Causes and Solutions for Ford Code P0722
| Cause | Solution |
|---|---|
| Damaged OSS Connector | Replace the damaged OSS connector. |
| Damaged OSS Sensor | Replace the damaged OSS sensor. |
| Incorrectly Installed OSS Sensor | Reinstall the OSS sensor correctly. |
| OSS Wiring Harness Intermittent Short | Check the wiring harness for any short circuits. |
| OSS Wiring Harness Open | Check the wiring harness for any open circuits. |
Damaged OSS Connector
When the OSS connector is damaged, it can cause the Ford Code P0722 to be triggered. This code indicates that the output shaft speed sensor is not sending a signal to the vehicle’s computer. The best way to fix this is to replace the damaged OSS connector.
Damaged OSS Sensor
If the OSS sensor is damaged, it can cause the Ford Code P0722 to be triggered. This code indicates that the output shaft speed sensor is not sending a signal to the vehicle’s computer. To repair this, the damaged OSS sensor must be replaced.
Incorrectly Installed OSS Sensor
When the OSS sensor is installed incorrectly, it can cause the Ford Code P0722 to be triggered. This code indicates that the output shaft speed sensor is not sending a signal to the vehicle’s computer. To repair this, the OSS sensor must be reinstalled correctly.
OSS Wiring Harness Intermittent Short
An intermittent short circuit in the OSS wiring harness can cause the Ford Code P0722 to be triggered. This code indicates that the output shaft speed sensor is not sending a signal to the vehicle’s computer. The wiring harness must be checked for any short circuits to repair this.
💥See also: Ford Code P059F
OSS Wiring Harness Open
An open circuit in the OSS wiring harness can cause the Ford Code P0722 to be triggered. This code indicates that the output shaft speed sensor is not sending a signal to the vehicle’s computer. The wiring harness must be checked for any open circuits to repair this.
Conclusion
The Ford Code P0722 is an error code that various causes can trigger. Damage to the OSS connector, OSS sensor, or the OSS wiring harness can all cause this code to be activated. The wiring, connector, and OSS sensor must be checked for damage to diagnose and repair this code. If any of these components are damaged, they must be replaced or improved to fix the Ford Code P0722.
📢Read also: Ford Code P0605
Was this page helpful?