When it comes to diagnosing automotive problems, the Dodge Code P2017 is one of the most common reasons for a check engine light. This fault code pertains to an Intake Manifold Runner Position Sensor Circuit issue. The Intake Manifold Runner Position Sensor Circuit is responsible for enhancing the engine performance and power output by providing a shorter runner between the Intake Manifold plenum and the Intake Manifold interface to the cylinder heads. With the help of a pneumatic/spring actuator and electronic solenoid valve, the SRV position is controlled. When any of the enable conditions are not met, the SRV valve is de-energized. However, this fault code can be caused by a variety of issues, ranging from a shorted SRV Sense Output Circuit to a Powertrain Control Module (PCM).
Causes and Solutions for Dodge Code P2017
| Cause | Solution |
|---|---|
| SRV Sense Output Circuit Shorted to Voltage | Check electrical connections, inspect the wiring, and repair if necessary. |
| SRV Sense Output Circuit Shorted to the Fused ASD Relay Output Circuit | Check the fuse and relay, and replace any damaged components if necessary. |
| SRV Ground Circuit Open or High Resistance | Check the ground circuit and repair or replace it as necessary. |
| Short Runner Valve | Inspect the SRV and replace it if necessary. |
| Powertrain Control Module (PCM) | Reprogram or replace the PCM as needed. |
SRV Sense Output Circuit Shorted to Voltage
One of the main causes of Dodge Code P2017 is a shorted SRV Sense Output Circuit. This occurs when the circuit is not connected properly and voltage is detected in the SRV Sense Output Circuit. To diagnose and fix this issue, a professional mechanic should check all electrical connections and inspect the wiring for any damage. If necessary, they can repair or replace any damaged components.
SRV Sense Output Circuit Shorted to the Fused ASD Relay Output Circuit
Another common cause of Dodge Code P2017 is a shorted SRV Sense Output Circuit to the Fused ASD Relay Output Circuit. This occurs when the circuit is not connected correctly, and the fuse and relay are damaged. A professional mechanic should check the fuse and relay and replace any damaged components to diagnose and fix this issue.
SRV Ground Circuit Open or High Resistance
The SRV Ground Circuit can also cause Dodge Code P2017 when it is open or has high resistance. To diagnose and fix this issue, a professional mechanic should check the ground circuit and repair or replace it as necessary.
Short Runner Valve
The Short Runner Valve can also be a cause of Dodge Code P2017. This occurs when the valve is damaged or not functioning properly. To diagnose and fix this issue, a professional mechanic should inspect and replace the SRV if necessary.
Powertrain Control Module (PCM)
Finally, the Powertrain Control Module (PCM) can also be a cause of Dodge Code P2017. This occurs when the PCM is not functioning properly or is damaged. A professional mechanic should reprogram or replace the PCM as needed to diagnose and fix this issue.
Conclusion: Expert Care is Needed to Resolve Dodge Code P2017
Dodge Code P2017 can be caused by a variety of issues, ranging from a shorted SRV Sense Output Circuit to a Powertrain Control Module (PCM). To diagnose and fix these issues, it is best to consult a professional mechanic who can check all electrical connections, inspect the wiring, replace any damaged components, inspect the SRV, and reprogram or replace the PCM as needed. With their expert care and attention, drivers can rest assured that their vehicles will be running smoothly and their Dodge Code P2017 will be resolved.
Was this page helpful?