RAM

RAM Code P2173 The RAM Code P2173 is a diagnostic code that is used to diagnose various problems related to the vehicle’s fuel system. It is a code that has been assigned to a specific set of conditions that could indicate a problem with the fuel system. This code is typically triggered when the vehicle’s

The RAM Code C2200-48 is a code used to identify a failure in the Anti-Lock Brake System (ABS) Module. This failure, referred to as a Supervision Software Failure, is an internal error detected by the ABS Module. It can have serious consequences and must be addressed as soon as possible. In order to properly diagnose

Understanding RAM Code P20E9 RAM Code P20E9 is an error code that commonly appears in vehicles with electronic fuel injection systems. This code is usually triggered when the PCM (Powertrain Control Module) detects a problem with the fuel injection system. This code can be caused by a variety of factors, including a faulty fuel injector,

The RAM Code P2273 is a common issue that can cause problems with O2 Sensor 2/2 Signal Biased Rich. This code is triggered when an aged Upstream O2 Sensor has a slower response rate than when it was new, moving less with the same air/fuel changes in a given time frame. This can result in

The RAM Code P0481 is a Cooling Fan 2 Control Circuit/Open issue which is caused by several factors, including an open or shorted circuit in the High-Speed Radiator Fan Control circuit, HIGH SPEED RADIATOR FAN RELAY CONTROL CIRCUIT OPEN, HIGH-SPEED RADIATOR FAN RELAY CONTROL CIRCUIT SHORTED TO GROUND, HIGH SPEED RADIATOR FAN RELAY, POWER DISTRIBUTION

RAM Code U0403 is implausible data received from T-Case detected when the Anti-Lock Brake System (ABS) Module perceives an incorrect CAN message from the Drive Train Control Module (DTCM). This code can cause various problems, from minor inconveniences to major malfunctions in the vehicle that can be potentially dangerous. The causes of this code can

With the advancement of modern cars, it is no surprise that vehicles often come with their own unique set of problems. This article will discuss the issue of RAM Code U1409, a powertrain control module (PCM) error code. The code, also known as an “implausible left front wheel speed signal received,” is triggered when the

RAM Code P262D is an error code that can be triggered by a malfunctioning Mass Air Flow Sensor (MAF) or a shorted 12-volt Supply circuit. A flashing ETC Lamp and limp mode often accompany this error code. The Powertrain Control Module (PCM) will turn off the MIL after the diagnostic runs and passes in four

The RAM Code P24D1 is a complex issue, and its diagnosis requires a deep understanding of the components involved, such as the Particulate Matter (PM) Sensor, the Diesel Particulate Filter (DPF), and the Powertrain Control Module (PCM) that communicates over the J1939 Data Link. In simple terms, the PM Sensor is used to measure the

When it comes to RAM Code P04DB, it is essential to understand the underlying causes and potential solutions in order to fix the issue. This RAM code is a Crankcase Ventilation System Disconnected code encountered when Powertrain Control Module (PCM) detects significantly elevated Crankcase Pressure readings, compared to historic trends saved in the PCM. This